skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200075l ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? sep tember 21, 2010 1 data sheet apd series: silicon pin diodes, packaged and bondable chips applications ? switches ? attenuators features ? established skyworks pin diode process ? low capacitance designs to 0.05 pf ? voltage ratings to 200 v ? chip size < 15 mils square ? tight control of i layer base width ? mesa and planar chip designs description skyworks apd series of silicon pin diodes are designed for use as switch and attenuator devices in high-performance rf and microwave circuits. the pin diode designs are useful over a wide range of frequencies from below 100 mhz to beyond 30 ghz. these devices use skyworks well-established silicon technology resulting in pin diodes with tightly controlled i-region characteristics. devices apd0505-000 through apd0810-000 are designed for fast speed through moderate speed switch applications. they have low resistance and capacitance at zero and reverse bias. the thick i-region apd2220-000 is designed for low-distortion attenuator applications. the absolute maximum ratings of the apd diode series are provided in table 1. electrical specifications are specified in table 2. typical performance characteristics are provided in figures 1 and 2. table 3 identifies the die part numbers with their corresponding top contact diameters and die outline drawings. table 4 identifies the hermetic part numbers together with their thermal resistance specifications and hermetic outline drawings.
data sheet ? apd series diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 september 21, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without no tice ? 200075l table 1. apd series absolute maximum ratings parameter symbol minimum typical maximum units power dissipation p dis case to junction j ce tan sis re thermal temp case t maximum ? ? ? w reverse voltage v r see voltage rating column in table 2 v forward current i f 200 ma operating temperature t op C65 +175 ? c storage temperature t stg C65 +200 ? c note: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceeding any of the limits listed here may result in permanent damage to the d evice. caution : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this devi ce must be protected at all times from esd. static charges may eas ily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions should be used at all times. table 2. apd series electrical specifications (note 1) (t op = +25 ? c, unless otherwise noted) junction capacitance (c j ) v r = 50 v, 1 mhz (pf) junction capacitance (c j ) v r = 0 v, 1 mhz (pf) series resistance (r s ), i = 10 ma, 500 mhz ( ) minority carrier lifetime (t l ) i = 10 ma (ns) voltage rating (note 2) (v) i-region thickness ( m) thermal resistance ( jc ) ( ? c/w) parameter maximum typical maximum typical nominal maximum switching applications apd0505-000 0.05 0.10 2.5 70 50 5 100 apd0510-000 0.10 0.20 1.5 90 50 5 80 apd0520-000 0.20 0.25 1.0 120 50 5 80 apd0805-000 0.05 0.10 2.0 100 100 8 80 apd0810-000 0.10 0.15 1.5 160 100 8 60 apd1510-000 0.10 0.20 2.0 300 200 15 60 apd1520-000 0.20 0.25 1.2 900 200 15 30 attenuator applications apd2220-000 0.20 0.35 4.0 700 100 50 80 note 1: performance is guaranteed only under the conditions listed in this table. note 2: reverse current is specified at 10 a maximum at the voltage rating noted. do not exceed this voltage.
data sheet ? apd series diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200075l ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? sep tember 21, 2010 3 table 3. apd series parts part number top contact diameter (0.5 mils) die drawing switching applications apd0505-000 1.5 150-806 apd0510-000 2.5 150-801 apd0520-000 3.5 150-801 apd0805-000 2.0 150-801 apd0810-000 3.0 150-801 apd1510-000 3.0 150-813 apd1520-000 4.0 150-802 attenuator applications apd2220-000 8.5 149-815 table 4. hermetic packages hermetic stripline drawing typical thermal resistance ( jc ) ( c/w) hermetic pill drawing typical thermal resistance ( jc ) ( c/w) hermetic pill drawing typical thermal resistance ( jc ) ( c/w) hermetic pill drawing typical thermal resistance ( jc ) ( c/w) apd0505-240 190 apd0505-203 130 apd0505-210 120 apd0505-219 190 apd0510-240 180 apd0510-203 110 apd0510-210 100 apd0510-219 180 apd0520-240 180 apd0520-203 110 apd0520-210 100 APD0520-219 180 apd0805-240 180 apd0805-203 110 apd0805-210 100 apd0805-219 180 apd0810-240 160 apd0810-203 90 apd0810-210 80 apd0810-219 160 apd1510-240 160 apd1510-203 90 apd1510-210 80 apd1510-219 160 apd1520-240 130 apd1520-203 60 apd1520-210 50 apd1520-219 130 apd2220-240 110 apd2220-203 100 apd2220-210 100 apd2220-219 110 typical performance characteristics at 25 c resistance ( ) forward current (ma) 0.1 1 10 100 1000 0.01 0.1 1 10 100 apd0505-000 apd0510-000 apd0805-000 figure 1. resistance vs forward current @ 1 ghz resistance ( ) forward current (ma) 0.1 1 10 100 1000 0.01 0.1 1 10 100 apd0810-000 apd1510-000 apd2220-000 figure 2. resistance vs forward current @ 1 ghz
data sheet ? apd series diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 september 21, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without no tice ? 200075l package outline drawings package outline die drawings for the apd diode series are shown in figures 3 and 4. hermetic package outlines are shown in figures 5 through 8. die packages 0.014 0.001 (0.325 0.025 mm) 0.014 0.001 (0.325 0.025 mm) cathode metallized back contact, gold anode top contact, gold 0.002 (0.050 mm) diameter minimum [0.008 (0.203 mm) diameter for the apd2220-000] 0.004 (0.010 mm) 0.006 (0.015 mm) nominal schematic s1565a 1 2 1 2 figure 3. 149-815 package anode metallized gold dot silicon cathode metallized back contact: gold 0.004 (0.127 mm) min. 0.006 (0.152 mm) max. 0.010 (0.251 mm) min. 0.014 (0.356 mm) max. sq. 150-801: 0.002 (0.051 mm) min. [0.0015 (0.038 mm) min. for the apd0805-000] s1567a schematic 1 2 1 2 150-806: 0.0011 (0.028 mm) nom. figure 4. 150 series package
data sheet ? apd series diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200075l ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? sep tember 21, 2010 5 hermetic packages 0.050 (1.27 mm) 0.040 (1.02 mm) 0.055 (1.40 mm) 0.051 (1.30 mm) dia s chematic n-type 1 2 1 2 figure 5. -203 package 0.025 (0.63 mm) max. 0.124 (3.15 mm) 0.119 (3.02 mm) dia. 0.097 (2.46 mm) 0.83 (2.11 mm) 0.083 (2.20 mm) 0.077 (1.95 mm) 0.064 (1.63 mm) 0.060 (1.52 mm) 0.225 (5.72 mm) 0.205 (5.20 mm) 0.064 (1.63 mm) 0.060 (1.52 mm) 2 places s1570 schematic 1 2 1 2 figure 6. -210 package
data sheet ? apd series diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 6 september 21, 2010 ? skyworks proprietar y information ? products and product information are s ubject to change without no tice ? 200075l hermetic packages (continued) 0.075 (1. 9 1 mm) 0.0 6 5 (1. 6 5 mm) s q. 0.045 (1.14 mm) 0.030 (0.7 6 mm) 1 c athode 2 12 0.020 (0.51 mm) typ. 0.033 (0.84 mm) min. 0.010 (0.24 mm) ref. s chematic s15 6 4 figure 7. -219 package -011 (240) 1 2 1 2 s chematic c olored dot denote s c athode 50 45 0.175 (4.44 mm) 0.125 (3.18 mm) 2 plc s . 0.104 (2. 6 4 mm) 0.0 9 2 (2.34 mm) s q. 0.042 (1.0 6 mm) 0.028 (0.71 mm) 0.005 (1.27 mm) 0.003 (0.7 6 mm) 0.0 9 8 (2.4 9 mm) 0.0 9 2 (2.34 mm) c over dia. 0.022 (0.5 6 mm) 0.018 (0.4 6 mm) 2 plc s . s15 6 8 figure 8. -240 package
data sheet ? apd series diodes skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200075l ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? sep tember 21, 2010 7 copyright ? 2002-2010 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. sk yworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any ki nd, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, qualit y or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. skyworks does not warrant the accura cy or completeness of the information, text, graphics or other items contained within these ma terials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequentia l damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such damage. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products , which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks, the skyworks symbol, a nd breakthrough simplicity are trademarks or registered tradem arks of skyworks solutions, inc ., in the united states and othe r countries. third-party brands and names are for identification purposes only, and are the proper ty of their respective owners. additional information, includ ing relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
|
